FSDR-512
Combination Fire Smoke Damper
Round Steel Blade
UL 555S Leakage Class II
UL555 1 1/2 Hour Fire Resistance Rating
Application
Model FSDR-512 is a combination fire smoke damper with round style
blades. The FSDR-512 has been qualified to 3000 fpm (15.2 m/s) and
4 in. wg (1 kPa) for operation and dynamic closure in emergency fire
smoke situations. Model FSDR-512 may be installed vertically (with
blades running horizontal) or horizontally and is rated for airflow and
leakage in either direction.
Model FSDR-512 meets the requirements for fire
dampers, smoke dampers and combination fire
smoke dampers established by:
Ratings
National Fire Protection Association
UL 555 Fire Resistance Rating
Fire Rating: 1 1/2 Hour
NFPA Standards 80, 90A, 92A, 92B, 101 & 105
IBC International Building Codes
New York City (MEA listing #260-91-M)
California State Fire Marshall
Dynamic Closure Rating: Actual ratings are size dependant
Maximum Velocity: 3000 fpm (15.2 m/s)
Maximum Pressure: 4 in. wg (1 kPa)
UL 555S Leakage Rating
Listing #: 3225-0981:112 (fire)
Listing #: 3230-0981:113 (smoke)
Leakage Class: II
Operational Rating: Actual ratings are actuator dependant
Maximum Velocity: 3000 fpm (15.2 m/s)
Maximum Pressure: 4 in. wg (1 kPa)
Maximum Temperature: 350º F (177°C) —Depending on
actuator
“UL CLASSIFIED (see complete marking on
product)”
“UL CLASSIFIED to Canadian safety standards
(see complete marking on product)”
Standard 555 (Listing #R13317)
Standard Construction
Standard 555S (Listing #R13447)
Frame/Sleeve:
Blade:
20 ga. (1mm) galvanized steel round
Double skin galvanized steel (14 ga.
[2mm] equivalent) round style blades
Extruded silicone rubber blade seals
1/2 in. (13mm) dia. plated steel
Stainless steel sleeve type
Seal:
Axle:
Bearing:
Fusible Link:
UL listed 165ºF (74ºC) -not 304SS
Size Limitations
Minimum Size:
Maximum Size:
6 in. (152mm) diameter
24 in. (610mm) diameter
Optional Features
• OCI (Open closed indication switches)
• 165º F (74°C), 212º F (100°C), and 350º F (177°C) RRL available
• TOR (remote override of 165º F (74°C) closure allows damper to
perform smoke management functions during a fire emergency)
• Electric or pneumatic actuators to accomplish smoke management
and system functions.
* Dimensions furnished approximately 1/8 in. (3mm) undersize.
• One retainer plate required, additional retainer plate available.
• 14 ga. (2mm) or 16 ga. (1.5mm) frame/sleeve
Opening + 2 in. Min.
Nut
Clamping
Minimum Wall/Floor Opening
Screw
Retaining
Plate Assembly
= Nominal Dia. + 7/8 in.
1.00 in. Min. Typ.
Clamping Screw
Fasteners
|
Graco Staple Gun 3A2494D User Manual
Greenheck Fan Ventilation Hood ES 30 User Manual
Harbor Freight Tools Cordless Drill 68126 User Manual
Harbor Freight Tools Portable Generator 91377 User Manual
Hasty Bake Convection Oven Continental User Manual
Heat Glo LifeStyle Indoor Fireplace FB GRAND S User Manual
Heath Zenith Door 595 5684 09 User Manual
Hotpoint Refrigerator FF4DK User Manual
HP Hewlett Packard Photo Printer A520 Series User Manual
IKEA Plumbing Product AA 290704 1 User Manual