Havis Shields Automobile Accessories C VS 1800 ECO User Manual |
INSTALL INSTRUCTIONS C-VS-1800-ECO
2004-2008 FORD ECONOLINE VAN
TOOLS REQUIRED:
3/8” Standard Socket Set
3/8” Metric Socket Set
3/8” Ratcheting Wrench
Powered drill w/ drill bit set
Open-end wrench set
Screw driver set
HARDWARE & COMPONENTS:
QTY DESCRIPTION
PART #
6
4
2
4
4
1
¼-20 Nylock nut
¼” Flat washer
¼-20 x ¾” Carriage bolt
¼-20 x 1 ¼” Hex head bolt
#10 x 1” Phillips sheet metal screw
Torx Screw Hardware Kit
GSM30016
GSM31005
GSM32000
GSM33003
GSM33196
C-HK-1
Always!
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use hardware provided with install kit
INSTALL C-VS-1800-ECO:
1. Remove O.E.M. engine cover accessory package (cup holder/storage pocket).
2. Place new console housing with mount brackets against engine cover and
floor. Mark engine cover and drill four (4) - 5/16” diameter holes. Mark
outline of floor bracket.
Also remove
washers from studs
C-VS-1800-ECO_INST_9-07
6. Attach Console to Mount Brackets.
7. Finished Product
C-VS-1800-ECO_INST_9-07
|
Graco Marine Sanitation System 312068M User Manual
Graco Water Pump 309250t User Manual
Greenheck Fan Fan 470656 User Manual
Hans Grohe Plumbing Product 06462XX0 User Manual
Honeywell Weather Radio TS34C User Manual
HP Hewlett Packard Car Video System f50 User Manual
HP Hewlett Packard Laptop 4330S User Manual
HP Hewlett Packard Network Card 2240 User Manual
HP Hewlett Packard Projector mp3130 User Manual
Husqvarna Chainsaw 225LD User Manual