Havis Shields Stereo Receiver C AS 1025 User Manual

ANGLED SERIES CONSOLES

INSTALLATION INSTRUCTIONS

Models C-AS-1060, 1025, 1325, 1525 & 1725

TOOLS REQUIRED:

Standard and Metric socket set with 6”extension.

Standard and Metric wrench set

#20 and #15 Torx driver

TRAK MOUNTED CONSOLE

HARDWARE:

QTY: DESCRIPTION:

PART #:

¼-20 X ¾”Hex Head Bolt

¼” Flat Washer

¼” Lock Washer

¼-20 Hex Nut

GSM33001

GSM31005

GSM31026

GSM30005

2/3

INSTALLATION:

1. Remove inner front seat mounting bolts near transmission

hump. Just loosen outboard bolts.

2. Place ¼ - 20 x ¾” Hex head bolts into under side tracks of

trak mount.

3. Position trak mount in desired location before tightening

down hump mount.

4. Mount rear hump brackets to under side of trak.

5. Place trak with positioned hump mount brackets over

transmission hump and onto front and rear seat mount

studs. Place seat bracket on top of hump mount brackets

and replace seat mount bolts.

6. Slide console up to dash and secure to trak mount with 1/4”

hardware.

7. Unit is ready to accept equipment control heads.